|
 |
|
| Soluble Cutting & Grinding Fluids |
| Q8 Baroni XAA |
Q8 Baroni XAA is a high oil content water soluble cutting fluid designed for use in extremely hard water conditions. Lubricity is improved due to the inclusion of synthetic esters. The high oil content provides maximum long term protection of machine tools and components produced.
Q8 Baroni XAA is designed for turning, milling, boring, deep hole drilling and reaming applications. Formulated for a wide range of materials and especially recommended for difficult aluminium alloys including sensitive aerospace grades; but also compatible with ferrous alloys, titanium, copper containing alloys, composites and oil resistant plastics.
|
|
| Q8 Baroni XCI |
Q8 Baroni XCI is a range of semi synthetic, chlorine and sulphur free water soluble cutting fluids compatible for ferrous materials on modern machining & turning centres. Traditionally materials such as Cast Iron, Black Bar and Flame Cut Steel can spoil the appearance of cutting fluid and promote premature degradation.
Q8 Baroni XCI had been developed to address the problem by maintaining fluid and machine cleanliness; costly drag out is also reduced over conventional cutting fluids
|
|
| Q8 Baroni XFES |
Q8 Baroni XFES is a semi synthetic, water soluble cutting fluid formulated for general to difficult machining of ferrous metals. It has been designed for use in modern high flow machining centres where high foaming may be a problem, specifically in soft water areas. It has been developed to keep machines extremely clean throughout the coolant life and the biostable properties mean that the emulsion does not degrade or produce odours and the emulsion needs little or no maintenance. Q8 Baroni XFES is designed for CNC machines, machining centres, flexible manufacturing and all centralised systems.
|
|
| Q8 Baroni XGP (Soft and Hard Water Variants) |
Q8 Baroni XGP (soft and hard water variants) is a multipurpose, semi-synthetic, water soluble cutting fluid with synthetic lubricity enhancers formulated to provide high performance on medium to difficult duty machining. The lubrication characteristics at the tool tip interface helps prevent built up edge. The biostable properties mean that the emulsion does not degrade or produce bad odours and the emulsion needs little or no maintenance. Specifically designed for use in modern high flow machining centres where high foaming may be a problem; especially in hard water areas.
|
|
| Q8 Baroni XGPD |
Q8 Baroni XGPD is a multipurpose, semi synthetic, water soluble cutting fluid with synthetic lubricity enhancers formulated for medium to difficult duty machining. It is specifically recommended for use in modern high flow machining where high foaming may be a problem, specifically in soft water areas. It is designed for CNC machines, machining centres, flexible manufacturing systems and all centralised sytsems.
|
|
| Q8 Baroni XHS |
Q8 Baroni XHS is a chlorine and sulphur free, synthetic water soluble cutting and grinding fluid with high Extreme Pressure (EP) performance. It has superb ferrous machining properties but can also be used on stainless steel, high tensile steels and inconels as well as other high specification alloys. Specifically designed for all general machining applications including thread cutting and forming, deep hole drilling and boring, gear hobbing and creep feed grinding.
|
|
| Q8 Baroni XMG |
| Q8 Baroni XMG is a water soluble cutting and grinding fluid that has been developed to give superb machining performance on magnesium and aluminium alloys. It has excellent low foaming characteristics making it suitable for high and low pressure CNC systems and has been developed to give exceptional emulsion stability in hard water applications. |
|
| Q8 Baroni XMP |
Q8 Baroni XMP is a multipurpose, semi-synthetic, water soluble cutting and grinding fluid formulated to provide high performance on difficult machining applications. Ideal for use in modern CNC machinery that requires a multifunctional metal working fluid.
Q8 Baroni XMP is designed for turning, milling, boring, deep hole drilling and reaming applications; also recommended for grinding and creep feed grinding where oil content is desired. Primarily formulated to cater for difficult to machine materials such as titanium and ferrous alloys; this product is also suitable for aerospace aluminium, plastics and polymers.
|
|
| Q8 Baroni XSP |
Q8 Baroni XSP is a multipurpose, semi-synthetic, water soluble cutting and grinding fluid formulated to provide high performance on difficult machining applications. Ideal for use in modern CNC machinery that requires a multifunctional metal working fluid. Provides low foaming characteristics in high speed machining where the application is dependant on high pressure through tool delivery systems.
Q8 Baroni XSP is designed for turning, milling, boring, deep hole drilling and reaming applications; also recommended for grinding and creep feed grinding where oil content is desired. Formulated for extremely arduous materials such as stainless steels, inconel, nimonics and also suitable for non ferrous alloys, copper alloys and aerospace aluminium including 7000 series, composite materials, carbon fibre and plastics.
|
|
| Q8 Beethoven ETL |
| Q8 Beethoven ETL is based on long term tried and tested technologies. This biostable semi synthetic product contains extremely powerful EP and lubricity additives. Biostable means that the product does not degrade in use or produce bad odours therefore the emulsion needs little or no maintenance. Q8 Beethoven ETL has outstanding corrosion protection even in hard water areas for ferrous metals giving rust and stain free machining. The formulation does not contain cresols, phenols or nitrites. |
|
| Q8 Beethoven G50 |
| Q8 Beethoven G50 uses advanced full synthetic anti corrosion additive technologies. This product is biostable meaning it does not degrade in use or produce bad odours therefore the translucent solution that Q8 Beethoven G50 produces needs little or no maintenance. Q8 Beethoven G50 has excellent corrosion protection even in hard water areas for all ferrous metals giving rust and stain free machining. Q8 Beethoven G50 is not affected by tramp oil as it is rejected readily. The formulation does not contain cresols, phenols, nitrites, sulphur or chlorinated paraffins. |
|
| Q8 Beethoven M |
Q8 Beethoven M is based on well tried conventional technologies. This low odour milky white metal cutting emulsion is manufactured from severly refined mineral base oil stock. Q8 Beethoven M has corrosion protective additives to protect both the work piece and the machine from rust and staining.
Q8 Beethoven M contains a powerful biocide to protect against bacterial and fingal infections keeping the emulsion newer for longer. The formulation does not contain cresols, phenols, nitrites or chlorinated paraffins. |
|
| Q8 Beethoven VEP |
Q8 Beethoven VEP is a biostable, high oil content soluble cutting fluid. The formulation of Q8 Beethoven VEP incorporates a chlorinated extreme pressure package to impart very high performance levels ensuring excellent surface finish and extended tool life. With a formulation containing 70% of hydro refined mineral oil and using the latest boron emulsion technology, the product offers improved stability in hard waters without scum formation resulting in excellent corrosion protection and very clean machines with no sticky deposits.
Q8 Beethoven VEP is suitable for use on all ferrous and non ferrous materials, offering a modern alternative with a versatility unattainable with previous technology.
|
|
| Q8 Beethoven VHD |
| Q8 Beethoven VHD is based on long term tried and tested technologies. This biostable semi synthetic product contains powerful EP and lubricity additives. Biostable means that the product does not degrade in use or produce bad odours therefore the emulsion needs little or no maintenance. Q8 Beethoven VHD has outstanding corrosion protection even in hard water areas for both ferrous and non ferrous metals giving rust and stain free machining. The formulation does not contain cresols, phenols or nitrites. |
|
| Q8 Beethoven VNF-2 |
| Q8 Beethoven VNF-2 is based on long term tried and tested technologies. This biostable semi synthetic product contains excellent lubricity additives to give outstanding surface finish. Biostability means that the product does not degrade in use or produce bad odours therefore the emulsion needs little or no maintenance. Q8 Beethoven VNF-2 has outstanding corrosion protection even in hard water areas for both ferrous and non ferrous metals giving rust and stain free machining. The formulation does not contain cresols, phenols, nitrites or chlorinated paraffins. |
|
| Q8 Beethoven XAL |
| Q8 Beethoven XAL has been specially developed for high speed machining of aluminium alloys. Q8 Beethoven XAL shows extremely good machining performance and excellent surface finish even on heavy cuts. It is a chlorine and sulphur free semi synthetic product which when mixed with water forms a semi translucent emulsion with biostable characteristics. The biostable properties mean that the emulsion does not degrade or produce bad odours and the emulsion needs little or no maintenance. The formulation does not contain added chlorine, sulphur, secondary amines, cresols, phenols or nitrites meeting current health and safety regulations. Q8 Beethoven XAL is non staining to aluminium and non corrosive to machine parts. Dilutions above 8% can prevent contact corrosion between aerospace alloys and mild steel. There are no sticky residues or sludge from this product. |
|
| Q8 Antifoam EWD 5 |
Q8 Antifoam EWD 5 is a highly effective silicone free antifoam designed for use in all water based fluids. Modern machinery has become more dependent on high pressure coolant delivery systems combined with smaller tank sizes. The coolant becomes aerated and the foam formed has little chance to collapse. Some foam generated has very elastic bubble characteristics and will not collapse on its own. This type of foam can continue to build until close down of the machine is necesary. In some cases foam overspill may be sufficient to force the close down of nearby machines as well.
Q8 Antifoam EWD 5 treatment is designed to control all foam problems in emulsion systems. It prevents foam build up immediately and continues working to prevent further foaming activity throughout the process. It is much more effective and economical than mechanical knock down systems and being silicone free, it cannot adversely affect adhesion in later processes such as Electro plating or surface coating. |
|
| Q8 Borodin B |
Q8 Borodin B is a chemical designed to increase the useful life of water based wire drawing lubricant in service by killing the all bacteria, fungi and yeasts present and then sterilising the system. Bacteria can exist and multiply dramatically under both aerobic (well aerated) and anaerobic (in the absence of oxygen) conditions, and left unchecked will speedily destroy any fluid system. The bacteria feed upon and consequently deplete the coupling agents in emulsions and deplete the anti corrosion agents. Fungi and yeasts can also multiply rapidly at the fluid/air interface in all kinds of fluids and these cause smells, unpleasant growths and slimes. In some systems these growths can be large enough to block filters and cause machine lubrication problems.
Q8 Borodin B keeps all types of wire drawing emulsions in good condition thereby eliminating problems with corrosion of machine parts caused by fluid degradation and avoiding unpleasant odours, growths and slimes. Die life and surface finish are maintained by preserving the lubrication characteristics of the fluid. Prompt treatment of a contaminated system is imperative to prevent the loss of operating efficiency. When treatment has been carried out correctly, service life of the fluid is extended and replacement delayed until convenient and when this would not interfere with production schedules. |
|
| Q8 Borodin F |
Q8 Borodin F is a chemical designed to increase the useful life of water based metalworking fluids in service by killing all fungi and yeasts present and then sterilising the system. Fungi and yeasts can multiply rapidly at the fluid/ait interface in all kinds of fluids and these cause smells, unpleasant growths and slimes. In some systems these growths can be large enough to block filters and cause machine lubrication problems.
Q8 Borodin F keeps all types of emulsions in good condition thereby eliminating problems with corrosion of machine parts caused by fluid degradation and avoiding unpleasant odours, growths and slimes. Prompt treatment of a contaminated system is imperative to prevent the loss of operating efficiency. When treatment has been carried out correctly, service life of the fluid is extended and replacement delayed until convenient and when this would not interfere with production schedules. |
|
| Q8 Brytoklean SC |
| Q8 Brytoklean System Cleaner is a water soluble chemical product with the ability to loosen and disperse deposits and at the same time kill bacterial contamination in soluble oil emulsions used in metal machining or forming operations. Bacteria can exist and multiply dramatically under both aerobic (well aerated) and anaerobic (in the absence of oxygen) conditions, and left unchecked will speedily destroy any emulsion system. The bacteria feed upon and consequently deplete the coupling agents and anti corrosion agents that are essential to correct and trouble free operation. |
|
| Q8 Degreasing Fluid |
| Q8 Degreasing Fluid is a powerful cleaner that dissolves the oil, grease and oil bound dirt and grime on factory machinery and floors allowing them to be washed clean with a water jet. A combination of powerful petroleum solvents and emulsifiers, Q8 Degreasing Fluid is effective in freeing heavy accumulations of dirt which have become locked in by successive layers of grease or oil and are difficult to remove by other methods. It has an extremely effetive cleaning action even at low temperatures although some warming may speed up the operations. After washing off, the surfaces are left clean and no harmful residues remain. The product is non caustic, non corrosive and can be used safely on all metals and alloys. Q8 Degreasing Fluid is more penetrating, more economical and safer to use than paraffin or white spirit. |
|
| Q8 Ravel SG & LG |
| Q8 Ravel SG & LG are water displacement fluids that deposit a rust preventing soft waxy film onto treated surfaces. They are very effective anti rust treatments for all wet parts, damp conditions and have been made easy to apply by the addition of a solvent to the formulation. The formulations also include powerful rust and corrosion inhibitors and film strength improvers. As used from the drum, these products have low surface tension, viscosity and a strong attraction to metal surfaces. They therefore spread rapidly to displace all water and completely cover all complex shapes inside blind holes and even penetrate porous components. After the solvent has evaporated, a protective soft waxy film remains clinging to the surfaces protecting them from further water and rust. The protective film is self healing in the event of scratchesor scrapes. |
|
|
|
